How to Replace a Thermostat in Your home

The thermostat of the HVAC unit in the home is an important component that controls the comfort level in the home. The thermostat will control the switch on and switch off of the unit as well as allow you to save energy in the home by offering varying adjustment options. When this portion of the unit breaks down, it needs to be replaced. A thermostat can be replaced by the home owner if the right steps are taken. Below is a simple guide to installing a new thermostat in the home. 

Preparation

First you will need to prepare for the new installation. You will need to check the current make and model of your unit. This will be the easiest installation. If you choose to install a new unit type, the installation may be a bit more difficult. The make of the thermostat will usually be marked on the front of the thermostat. You can then visit the website of the system to identity the model if need be. 

Usually, thermostats are fixed to a sub-base. If you purchase the same unit type, you will be able to keep the sub-base, which will save you money and help with installation. The sub-base is the portion of the unit that houses the wiring and is fixed to the wall. Once you have identified your unit type, order a new thermostat for installation. 

Prepping the Area

The old thermostat must first be removed to begin the new installation. Sometimes the thermostat will pull right off of the unit and other times you may have to remove screws. Determine which needs to be done and proceed. Once the plate has been removed, you will be ready to add the new unit. 

Replacing the New Thermostat

The new thermostat is now ready to be set in place. With most models, you will have tabs that will hook on to the thermostat to hold the unit in place. You will need to hand the new thermostat on the top at the tabs and then attach to sub-base. You will then swing the unit top down and press the bottom inward to attach. The thermostat should snap easily in place. You can then attach screws if they are needed. 

The ease of installation will be based on the type of thermostat you have. Read any directions carefully and if you still have issues, contact a local HVAC technician. You may be able to receive assistance over the telephone without having to pay for service.  Or you may know a handy man that can help you install the unit. Either way, take your time and make sure the thermostat is installed correctly so your unit will work as it should from the time of installation. 

Once your new unit is in place, you will need to record the time of installation. Check the unit at least once a year to ensure the thermostat is working well. Keeping record will allow you to remember how old your thermostat is and alert you of when a new installation may be needed.